Pedestal Enclosure
APXPE401615
APX NEMA 3R Pedestal Enclosure
Note: sheld does not come standard
Options & Accessories:
Windows
Floor Stands
Paint Finishes
Panel, Painted Steel
“B” Size Switch Compartment
Double Door Enclosure
The enclosure and enclosure door are made form 0.125″ thick aluminum.
The top of the enclosure is pre-punched with 2-1/2″ diameter hole and four (4) 5/8″ diameter holes of 4″ diameter bolt circle on 45° angle from center line.
A cover plate is made of 0.125″ thick aluminum with closed cell gasket secured with two (2) 1/4-20 stainless steel carriage bolts and stainless steel nylock nuts are supplied.
The base of the enclosure is made of 1/2″ thick type 5052-H32 aluminum plate with ample cutouts for electrical cable clearance. The base is designed for exterior anchor bolt mounting, centers 11-1/2″ wide by 13-1/2″ deep.
A plywood panel, 3/4″ thick by 12″ x 34″, is secured to the back wall of the cabinet with four (4) stainless steel 5/16″-18″ by 1-1/2″ threaded studs, flat washers and lock nuts.
The main door of the enclosure is made from 0.125″ thick type 5052-H32 aluminum.
The main door lock is Corbin #R357SGS series or equal, and has a keyhole cover.
Door is hinged to the enclosure with two (2) heavy gauge stainless steel butt hinges with 1/4″ diameter stainless steel pins. Hinges are secured to the door and enclosure with 1/4-20 stainless steel carriage bolts and stainless steel nylock nuts.
The main door is sealed with closed-cell neoprene gasket.
Natural aluminum enclosures are mill finished per federal specification QQA-250/8.
Painted enclosures are treated with a three (3) stage iron phosphate coating and dried by radiant heat. Standard finish coat is a polyester powder coating.
